Cycle And Option Descriptions; Cycle Selections - Whirlpool GU2455XTSS0 Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

Estimated cycle times may increase or decrease depending on water temperature, soil conditions, dish load size, and options selected.

You can customize your cycle by selecting an option.

See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change

an option anytime before the selected option begins. At each stage of the wash cycle, you may hear noises that you are not used to

hearing in your previous dishwasher. Each cycle will provide a series of pauses and water sprays throughout the wash cycle. This is

normal and will provide optimal cleaning performance.

CYCLE SELECTIONS

IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts

the cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the

cycle will automatically compensate by adding time, heat, and water as needed.

This cycle senses the load size, soil amount, and toughness of soil to adjust the

cycle for improved cleaning, using only the amount of water and energy needed.

The Sensor cycle is automatically selected if you first press the Start button.*

Use for hard-to-clean, heavily soiled pots, pans, casseroles, and tableware.

This cycle is recommended for daily, regular or typical use to completely wash

and dry a full load of normally soiled dishes. This dishwasher's government energy

certifications were based on the Normal cycle with only the Heated Dry option

selected.**

For fast results, 1-Hour Wash will clean dishes using slightly more water and energy.

Select the Heat Dry option to provide best dry performance.

This cycle quietly soaks dishes with an extended prewash, which eliminates the

need to presoak dishes, saving personal time and effort. For optimal cleaning results

during the Soak & Clean cycle, add prewash detergent. Use this cycle for loads with

heavy amounts of dried on or hard to clean baked-on food.

This is a specialty cycle that you select from the Whirlpool

to your dishwasher. Your dishwasher remembers this cycle until you replace it by

downloading another cycle from the Whirlpool

* The government energy certifications are not based on this cycle. See the Normal cycle description for the government energy

certification cycle. Using the Sensor cycle may increase your energy usage.

**No other washing and drying temperature options were selected, and it was not subject to truncated testing. Rinse aid was not used,

and there was no detergent used in the prewash.

Cycle and Option Descriptions

CYCLES

app.

app and download

ESTIMATED

WATER

WASH TIME

USAGE

DISPLAYED

GALLONS

HH:MM W/O

(LITERS)

OPTIONS