Descargar Imprimir esta página

Panacom LP-8804 Manual Del Usuario página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

18. Skip Up button.
19. Play or pause button.
20. Skip down button.
21. Mode: to select FM radio/USB/SD or LP songs.
Initial Set-Up
Mains Connection
Ensure that the mains voltage of your home corresponds to the
operating voltage of the unit. Your unit is ready to be connected to a
mains voltage of 100-240V/50-60Hz.
Amplifier Connection (If Required)
Whilst you can listen to your new turntable using the built in
speakers you may also wish to connect it to your existing Hi Fi
system. To do that, connect the audio plugs to the AUX input on
your mixer or amplifier using an RCA cable (not supplied)
• Red plug into R/H channel input.
• White plug into L/H channel input.
Playing a record
- Place the record of your choice on the turntable. If required, do not
forget to place the adaptor on the record spindle.
- Choose the desired playing speed using the speed selection
switch between 33.3, 45 and 78rpm.
- Turn on the Rotary Power Switch. Note: it also controls the volume.
- Release the tone arm lock.
- Raise the arm with your hand lightly.
- Place the stylus vertically over the first track of the record, the
turntable will start turning automatically.
- Slowly put down the stylus on to the record to star playing.
- When a record comes to an end, the turntable will stop
automatically as long as the auto-stop switch is in the ON position.
Pg. 5

Publicidad

loading

Productos relacionados para Panacom LP-8804