How To Use - Emtek Assa Abloy EMTouch Guía De Instalación Y Programación

How to Use

Your Emtek lock is shipped with two 4-digit user codes and a 6-digit programming code.
These codes are randomly generated at the factory.
(Turn to next page for Programming Instructions.)
To Unlock
1. Press EMTEK key or touch 3 fingers
across screen.
2. Enter 4-digit user codes.
(See sticker located on the inside
trim plate or back cover page).
3. Turn Handle.
Passage Feature
(Does not apply to Keypad Storeroom/Gate product)
Activate by turning the inside thumbturn to the unlocked
position. This will engage the outside lever so a code is not
required to enter.
To Lock
1. Rotate Thumbturn from inside.
Locked
Your Lock is Ready to Use
Unlocked
1
2
3
1
EN EN
9