Publicidad
Idiomas disponibles
Idiomas disponibles
The number of times you can recharge a USB device will
vary from brand-to-brand and device-to-device. For actual
recharge times, contact your device manufacturer for more
specifications of your internal battery. For reference purposes
only, below are the estimated number of recharges (up to) per
device, per model. Actual results may vary.
Model
XGB3
2
3
XGB3L
2
3
XGB6
4
6
XGB12
8
12
Understanding Charge LED(s).
The Charge LED(s) indicate the internal batteries state-of-
charge (SOC) both when charging and discharging. The XGB3
and XGB3L have one (1) Charge LED, whereas, the XGB6
and XGB12 have four (4) Charge LEDs (25%, 50%, 75% and
100%).
When Charging.
Below illustrates how the Charge LED(s) will operate when
charging:
XGB3/XGB3L
The XGB3 and XGB3L will pulse a red LED "on" and "off"
when charging, then turn solid green when fully charged.
XGB6/XGB12
When first powered "on", the XGB6 and XGB12 will quickly
flash all Charge LEDs. This shows all LEDs are properly
working. The XGB6 and XGB12 will then show the batteries
current SOC, and begin charging. During charging, each
charging stage will pulse "on" and "off", then turn solid. When
3
6
50%
Boost
3
6
50%
Boost
6
12
1
12
24
2
all Charge LEDs are solid (Red, Red, Yellow, Green),
the battery pack is fully charged and ready to use.
When Discharging.
Below illustrates how the Charge LED(s) will operate when
discharging:
XGB3/XGB3L
The XGB3 and XGB3L will display a green LED when the
battery pack is between 80-100% charged, and a red LED
when between 2-79% charged. Two percent (2%) of the
battery capacity is reserved for low battery indication.
XGB6/XGB12
The XGB6 and XGB12 capacity will reduce after use, as
indicated the 25%, 50%, 75% and 100% Charge LEDs. Only
the illuminated Charge LEDs displays the current SOC. As the
battery pack is losing capcity, each Charge LED will rapidly
pulse "on" and "off".
When Disconnecting from Power.
Below illustrates how the Charge LED(s) when disconnecting
from power:
XGB3/XGB3L
The XGB3 and XGB3L will flash a green LED two (2) times
when disconnected from power.
XGB6/XGB12
The XGB6 and XGB12 will flash the red 25% LED two (2)
times when disconnected from power.
Glow Light.
[XGB6 and XGB12]
The XGB6 and XGB12 come with a Glow Light. The Glow
Light is a low-current, LED light to provide low-light during
nighttime conditions for reading, or locating the USB ports.
Glow Light is not designed to be a flashlight replacement. A
small Power Button labeled Gloww turns the Glow Light "on"
and "off".
EN
4
Publicidad
