Casals VML200 Manual Del Usuario página 3

English
MULTI SANDER
VML200
Dear Customer,
Many thanks for trusting to Casals. Thanks to its con-
tinuous effort, our innovation and the strictest quality
controls, Casals develops electric Power Tools for the
toughest jobs.
GENERAL POWER TOOLS SAFETY WARNING
WARNING Read all safety warnings and all in-
structions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work Area Safety
- Keep the work area clean and well lit. Cluttered or
dark areas invite accidents.
- Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes
- Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control
Electric safety
- Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodi-
fied plugs and matching outlets will reduce risk of electric
shock
- Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrigera-
tors. There is an increased risk of electric shock if your
body is earthed or grounded
- Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the risk
of electric shock
- Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock
- When operating the power tool outdoors, use an
extension cord suitable for outdoor use. Use a cord
suitable for outdoor use reduces the risk of electric shock
- If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock
Personal safety
- Stay alert, watch you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inatten-
tion while operating power tools may result in serious
personal injury
- Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protec-
tion used for appropriate conditions will reduce personal
injuries.
- Prevent unintentional starting. Ensure the switch
is in the off-position before connecting the power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on
invites accidents
- Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury
- Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations
- Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can
be caught in moving parts.
- If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Power tool use and care
-Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed
-Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired
-Disconnect the plug from the power source and/
or battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally
-Store idle power tool out of the reach of children and
do not allow persons unfamiliar with the power tool
ORIGINAL instructions
3