Maintenance, Servicing & Repair; Repairs; Calibration - Bibby Scientific Techne GT-5 Manual Del Operador

MAINTENANCE, SERVICING & REPAIR
WARNING: Ensure the unit is disconnected from the mains electricity supply before attempting
maintenance or servicing.
This range of equipment does not require routine servicing. The only maintenance required is to clean
external surfaces with a damp cloth and mild detergent. Spillages or splashes should be cleaned up
straightaway after isolating the unit from the mains electricity supply.

REPAIRS

Any repairs or replacement parts must be undertaken by suitably qualified personnel.
Only spare parts supplied or specified by Bibby Scientific Ltd. or its agent should be used.
Fitting of non-approved parts may affect the performance of the safety features designed into
the instrument.
For a comprehensive list of parts required by service engineers conducting internal repairs, or to receive
a service manual, please contact the Service Department of Bibby Scientific Ltd quoting both the model
and serial number.
If in any doubt please contact the Service Department of Bibby Scientific Ltd.
Beacon Road, Stone, Staffordshire ST15 0SA, United Kingdom
Tel: +44 (0)844 936 0234
service@bibby-scientific.com

CALIBRATION

Your Gelation Timer has been carefully factory calibrated and is provided with a calibration certificate. If
you require your unit to be re-calibrated at any time, please contact our Service Department of Bibby
Scientific Ltd.
16