Chauvet LX5 Guía De Referencia Rápida página 3

EN
Product Overview
AC Power
Power Linking
Fuse
Replacement
Mounting
Product
Mounting
Diagram
Safety Loop
Automatic/Sound
Switch
The LX5™ has a switchable power supply and it can work with an input
voltage of 120VAC, 50/60 Hz or 230VAC, 50Hz, depending on the position
of the voltage selection switch.
UK Only: This product has a fixed voltage power supply that works with an
input voltage of 230VAC, 50Hz.
You can link up to 50 LX5™ units at 120VAC and 100 units at 230VAC.
To replace the fuse in the LX5™:
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the Safety Notes.
Mounting Bracket
3
LX5™ QRG
Power Selection Switch
Sound Sensitivity
Knob
Bracket Adjustment Knob