setting up your dishwasher
CONTROL PANEL
DW80F600 Series
1
POWER
1
CYCLE
2
SELECTOR
SANITIZE
3
CHILD LOCK
4
8_ setting up your dishwasher
DW80F600_DD81-01555A-01_EN.indd Sec3:8
DW80F600_DD81-01555A-01_EN.indd Sec3:8
2
3
When you press the Power button, the entire display turns on and off, and
then the light of the most recently fi nished cycle lights up.
When the cycle you selected has fi nished, all other indicator lights are
turned off and the "Clean" light is illuminated for 10 minutes.
Then, the Power turns off automatically.
Select the appropriate wash cycle depending on the soil level of your
dishes. After you select a cycle, the Cycle On light for that cycle lights up.
If you want to cancel the selected cycle, press the selected cycle button
again.
The temperature rises to 162 ˚F (72 ˚C) in the fi nal rinse cycle for high
temperature sanitization.
If you select the Sanitize option, the "Sanitize" lamp blinks when the water
temperature reaches the sanitary temperature (over 155 ˚F (68 ˚C)), and then
remains illuminated until the Sanitze option ends. When you open the door
or press the Power button, the "Sanitize" lamp turns off.
You cannot select the Delicate cycle if you select the Sanitize option.
The Sanitize feature operates in accordance with NSF/ANSI Standard
184 for Residential Dishwashers. Certifi ed residential dishwashers are
not intended for licensed food establishments. Your dishwasher is NSF
Certifi ed.
The cycle that is NSF certifi ed is the Heavy Cycle with the sanitize option
selected.
This option allows you to lock the buttons on the control panel so children
cannot accidently start the dishwasher by pressing the buttons on the
panel.
To lock and unlock the buttons on the control panel, hold the Child Lock
button down for three (3) seconds.
-
When Power is On : Hold down the Child Lock button for three (3)
seconds.
-
When Power is Off : Push the Power button fi rst, and then hold down
the Child Lock button for three (3) seconds.
4
5
6
7
2013-06-04
2013-06-04
11:26:51
11:26:51