Installation
STEP 3 Flooring
NOTE
If the refrigerator cannot pass through the entrance due to its size, see the Door removal
for entrance section in the Installation chapter.
24
English
Untitled-28 24
4. Insert the upper area of the dongle
cover first, and then close to lock as
shown.
NOTE
The marked area is the cover of the
optional dongle, not a crack or defect.
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the floor, put a large piece
of cardboard on each leg of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpets along the movement
path.
7/17/2017 4:54:40 PM