Installation; Power Supply; Operation Using The Mains Adapter; Operation Using The Battery - Promax RP-110 Manual De Instrucciones

USER'S MANUAL. RP-110

3 INSTALLATION

3.1 Power Supply

The RP-110 is a portable instrument powered by a rechargeable Li-Ion battery.
The instrument comes with a mains adapter which enables the RP-110 to be plugged to
the mains for operation and battery charging. On the screen there is a real-time battery
indicator.

3.1.1 Operation Using the Mains Adapter

Connect the mains adapter to the RP-110 through the external power connector
[6] (see figure 2.-) placed at the right side of the instrument.
Then, connect the adapter to the mains to start up battery charging. When the
battery is full, the charging process finish automatically.
Next, press the ON / OFF
Before using the mains adapter make sure that it is the appropriate one for your
mains voltage.

3.1.2 Operation Using the Battery

Press the key ON / OFF
The instrument works powered by a Li-Ion battery of 7.4 V and 2.2 Ah.
When the battery is full loaded, the RP-110 has an autonomy aprox. of 5 hours of
continuous work.

3.1.3 Battery Charging

First switch off the RP-110 in order to charge the battery. Then connect the power
input [6] to the mains adapter. Now connect the adapter to the mains. The charging
process starts automatically. Charging time depends on the state of the battery. If the
battery is flat, the battery charging time is 3 hours aprox.
Página 5
[1] key. Then the instrument starts working.
[1] to start the instrument powered by the battery.
CAUTION
10-2010