Rise RANGER 500/I Manual De Instalación página 12

GB
Assembly instructions - RANGER 500
7- Before installing the bollard, remove the plug and clean
carefully the seat of the bollard, shown in the drawing with
grey colour.
8- Use three eyebolts with M16 studs to lift the bollard.
See figures alongside.
M10x40
M10x40
9 - After positioning the bollard inside the case, remove the
lifting eyebolts.
Using the dowels, adjust the level positioning of the bollard
with respect to the floor, checking it with a spirit level.
Please check the distance between the flange and the
ground level , it has to be 23/24mm. In this way the flange
will remain at 1/2 mm from the ground level avoiding infil-
tration of dust/sand into the bollard seat.
1/2 mm
See figures alongside.
23/24 mm
1/2 mm
23/24 mm
12 - RANGER