Klarstein 10032081 Manual De Instrucciones página 13

Display and operation panel
Setup tempperature and timer
1 Plug it into the outlet. The
standby mode.Press the
beep for every pressing.
2 Temperature setting. press the (+) or (–) adjust button to set the temperature.
3 Time setting. Press the
4 First press the (+) or (–) adjust button to set hour, then press
minute. The timer will countdown when it meets the setting temperature.
Press the POWER icon again to confirm the setting and the unit will work.
4 If you want to change the setting, press and hold the
then repeat the setting as above.
The unit will stop automatically when it runs out of time and an "END" icon will show
on the screen.
5 Press and hold the
icon and working lamp will be on and it will enter the
icon to enter the setting mode. You will hear a sound of
icon to set the time. You can find the timer blinks.
icon for 3 seconds to stop.
again to set the
uicon for 3 seconds, and
EN
13