Funkwerk elmeg CS290 Manual Del Usuario página 22

To end the three-party conference, press the softkey below »
the subscriber of the last previous active connection. The other subscriber is put on hold.
Call switching
When a call is transferred, the active subscriber and the subscriber for the connection previously
put on hold are always connected with one another.
You can initiate an inquiriy call yourself (e.g. in order to announce the call) and can then transfer
the call.
g
Call with subscriber 1
Keypad
Using the Keypad function you can manage service or features in the PABX system or in the net-
work of the service provider by entering character strings and digit sequences via the keypad.
g
Conversation
Tone dialing (dtmf dialing)
Using tone frequency dialing, you can transmit multifrequency signals (DTMF signals) during
an ongoing call in order, for example, to poll your answering machine. If call waiting is active for
an ongoing connection, tone frequency suffix dialing can not be utilized.
g
Conversation
RESET - Restauring the default telephone settings
You can reset the telephone to its initial state using the procedure described below. All of the data
that you have entered previously will be deleted.
a
Handset on hook
S
Press the softkey below »
telephone to its initial state. If you do not
wish to have the data deleted press the
softkey below »
The telephone is reset to its initial state.
All data are deleted.
18
R
Subscriber 1 in hold condition
S
keypad
Input of character strings and digit sequences
S
dtmf
Input of character strings and digit sequences
F S
config
« to reset the
ok
«.
no
«. You are reconnected with
back
t
Dial call number
t
t
> S
service
Sure to delete all?
no user
01.11.05 08:30
tbuch vip
S
x-fer
S
data
ok
}