Publicidad
Idiomas disponibles
Idiomas disponibles
Pressure Regulator
Installation
Operation
WARNING
NOTICE
!
Disconnect power and
Ensure the regulator
release all pressure from the
adjusting knob is unlocked
when adjusting pressure. The
system before attempting to
regulator will be damaged if the knob
install, service, relocate or perform any
is turned in the locked position.
maintenance.
1. Unlock the regulator adjusting
1. Locate the air flow direction arrow
knob by pulling knob away from
(See Figure 2, detail). This arrow
the regulator.
shows the direction of the air flow,
i.e., it points to the outlet.
2. Turn the regulator adjusting knob
counterclockwise until no load is on
Flow
the regulating spring.
direction
arrow
3. Turn on the air pressure supply and
turn the adjusting knob clockwise
until the desired outlet pressure is
reached. Push the regulator
adjusting knob toward the
regulator to lock in desired
pressure.
Figure 2 Detail showing location of
flow direction arrow
2. Install the gauge (if applicable).
Use PTFE tape on threads.
3. Remove plug(s) from plastic bag.
The plug(s) have pre-applied
sealant. No additional sealant is
required. Install plug(s) into the
open 1/8" NPT hole(s).
4. Securely mount the regulator in any
position as close as possible to air
tool connection.
5. Verify the arrow points to the
outlet. (See Figure 2.)
6. Install the unit with the same pipe
size as the piping in use. Avoid
using unnecessary fittings,
couplings, etc., that restrict airflow.
7. Connect the air supply to the 1/4"
NPT inlet port.
www.chpower.com
Model PA212303, KBA109, HDA707
Technical Service
For information regarding the
operation or repair of this product,
please call 1-800-543-6400.
2
Regulador de Presión
Para ordenar repuestos, sírvase llamar al concesionario
más cercano a su domicilio
Sirvase darnos la siguiente información:
- Número del modelo
- Número de Serie o código con fecha (de haberlo)
- Descripción y número del repuesto según la lista
de repuestos
1
2
6
4
8
2
10
0
11
BAR
100xkPa
psi
3
Figura 3
Modelo PA212303, KBA109, HDA707
Puede escribirnos a:
Attn: Customer Service
100 Production Drive
Harrison, OH 45030 U.S.A.
Lista de Repuestos
No. de
Ref.
Descripción
Repuesto
1
Tapón NPT de 3,2 mm (1/8")
ST022400AV
Lista de Repuestos Opcionales*
No. de
Ref.
Descripción
Repuesto
2
Manómetro, 3,2 mm (1/8") NP,
montaje trasero
HF007600AV
3
Ménsula modular
SX139600AV
4
Ménsula para pared
SX139700AV
*Se vende por separado
4
11 Sp
Ctd.
1
Ctd.
1
1
1
Publicidad
