Publicidad
Idiomas disponibles
Idiomas disponibles
Additional safety points for your
planer
1
Use clamps or another practical way to secure and the
workpiece to a stable platform. Holding the work by hand or
against your body leaves it unstable and may lead to loss of control.
2
Hold tool by insulated gripping surfaces when performing an
operation where the cutting tool may contact hidden wiring.
Contact with a 'live' wire with also make exposed metal parts of
the tool 'live' and shock the operator condition.
3
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
4
when an extension cable is required you must ensure it has the
correct ampere rating for your power tool and is in a safe electrical
condition. Fully unwind cable drum extensions to avoid potential
overheating.
5
Ensure your mains supply voltage is the same as indicated on the
rating plate.
6
Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
7
Always check walls, floors and ceilings to avoid hidden power
cables and pipes.
8
After long working period's external metal parts and accessories
could be hot.
9
wear eye protection when operating this tool.
10
The base plate must always be held firmly against the material
being cut to reduce vibration and blade jumping.
11
If possible, ensure the workpiece is firmly clamped to prevent
movement.
12
Your Planer is a hand held tool; do not clamp your planer.
13
Before cutting, check the cutting line is free of nails, screws, etc.
14
Never stop the cutting blade by applying pressure to the blade.
15
Only withdraw the planer from the cut when the blade has stopped
moving.
16
Only use blades in excellent cutting condition.
17
Do not put your fingers into the dust extraction. Use a wooden
stick to unblock any material.
18
Always wear a dust mask.
Warning: Some dust particles created by power sanding,
sawing, grinding, drilling and other construction jobs contain
chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
•
Lead from lead-based paints.
•
Crystalline silica from bricks and cement and other masonry
products.
•
Arsenic and chromium from chemically treated lumber.
•
Your risk from these exposures varies, depending upon how
often you do this type of work. To reduce your exposure to these
chemicals.
•
work in a well-ventilated area.
work with approved safety equipment, such as those dust masks
that are specially designed to filter microscopic particles.
7
Publicidad
