Optional Accessories - AKG WMS40 Modo De Empleo

2 Description
2.1 Introduction
Thank you for purchasing an
AKG product. This Manual contains
important instructions for setting up and
operating your equipment. Please take a
few minutes to read the instructions
below carefully before operating the
equipment. Please keep the Manual for
future reference. Have fun and impress
your audience!
2.2 Unpacking
PR 40 1 connecting 1 belt
receiver cable with clip
unterminated
leads
Check that the packaging
contains all of the com-
ponents listed above. Should
anything be missing, please
contact your AKG dealer.
Velcro
strip

2.3 Optional Accessories

2 AAA
size 1.5 V 2.4 Description
batteries
The PR 40 is a portable diversity receiver
for use with all AKG WMS 40 Series
• CU 40 charger
• Custom versions of AKG
headphones with .1-in. jack
plug. (On request – K 10
shown.)
transmitters (HT 40, PT 40, GB 40, MP
40, SO 40). The supplied Velcro strip
allows you to mount the receiver on a
mixer, pedalboard (to give effect-loving
guitarists more room to move), or a
video camera for ENG use.
Thanks to its compact dimensions and
convenient belt clip, the PR 40 is an
excellent receiver for tour guide and
small interpretation systems.
A preset squelch will mute the receiver if
the received signal is too weak so the
related noise or the self-noise of the
receiver will not become audible when
the transmitter is switched OFF.
The PR 40 operates on one fixed, quartz
stabilized frequency in the 710 MHz to
865 MHz UHF carrier frequency range
and uses two folding UHF antennas. The
color of the volume control indicates the
receiving frequency. The type plate on
the receiver rear panel provides detailed
frequency information.
11