Intended Use; Battery Charging; Switching On / Off - Crown CT44022 Manual Original

Symbol

Intended use

Line laser is intended to draw and / or control horizon-
tal, vertical and inclined lines�
Components
1 Strap
2 Battery case cover
3 Socket for power unit connector
4 Vertical emitter window
5 Horizontal laser beam on / off switch
6 Laser beam on / off switch with a locked laser head
7 Vertical laser beam on / off switch
8 Bubble level
9 Laser head position lock
10 Adjustable leg
11 Swivel bolt
12 Horizontal emitter window
13 Power unit *
14 Carrying belt *
15 Laser viewing glasses *
16 Case *
17 Blind plug
18 Indicator
* Optional extra
Not all of the accessories illustrated or described
are included as standard delivery.
Installation / regulation
Do not draw up the fastening ele-
ments too tight to avoid damaging the
thread.
Meaning
Locked�
Unlocked�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Attention� Important�
Useful information�
Do not dispose of the appli-
ance in a domestic waste
container�
Mounting / dismantling / adjustment of
some elements is similar for all appliance
models. In this case no particular appli-
ance model is indicated in the explana-
tory drawing.
Adjustable legs (see fig. 1)
In case of an acoustic signal and blinking laser
beams when the appliance is turned on, horizontal
misalignment of the appliance is more than ±3°�
Adjust the position of the appliance with legs 10 with
reference to bubble level 8 indication as shown in
figure 1.

Battery charging

Initial operating
The appliance is delivered with partial battery
charge. Fully charge the battery before the first
use of the appliance.
Charging (see fig. 2)
• Connect power unit 13 to the mains (indicator 18
lights green, ready to charge)�
• Connect the plug of power unit 13 to socket 3 (see
fig. 2). During charging indicator 18 lights red� When
charging is complete, indicator 18 lights green�
• When charging is complete, disconnect plug of
power unit 13 from socket 3 and unplug power unit 13
from the mains�
During charging the battery and power
unit 13 of the appliance may become hot -
it is no problem.
You can use the appliance during
charging. It will cause no harm to the
battery.

Switching on / off

When self-levelling is on
Switching on:
Set lock 9 to position as shown in fig. 3.1. This will
unlock the suspension gear of the laser head, turn laser
power and bubble level lighting 8 on� If the appliance
is positioned on the inclined surface with an angle of
more than ±3°, you will hear an acoustic signal� You
can switch on and off the laser beams pressing on / off
switches 5 and 7�
Switching off:
Set lock 9 to position as shown in fig. 3.2. This will
lock the suspension gear of the laser head, turn laser
power and bubble level lighting 8 off�
When self-levelling is off
Switching on:
Set lock 9 to position as shown in fig. 3.2, then press
and release on / off switches 6� Laser power is now on,
English
12