Tips On Measurement - Powerfix Profi HG01701B Instrucciones De Utilización Y De Seguridad

device is switched on. Bring the selection
arrow over the desired menu point by repeat-
edly pressing the selection button (►)
meaning of the individual menu points are:
; Wooden beam search
: Metal search
: Void search
: Power line search
 
G uide the detector over a location on the
surface to be examined, where you know that
there is no object, which you are looking for.
Then press the PUSH button
pressed down. Guide the detector, with the
underside flat, over the surface to be exam-
ined. It is possible that during this some short
signal tones may sound. These are however
without any meaning, so long as no intensity
display
8
(Fig. B).
 
I f there is an object, for which the search is
activated, in the vicinity of the detector,
several bars appear at first on the intensity
display. As proximity to the search object in-
creases, the number of bars increases on the
intensity display (Fig. C).
 
I f the detector is exactly over the search
object, a continuous signal tone sounds.
 
I n the case of a search for a power line, the
voltage sign ( )
to the intensity display.

Tips on measurement


 
T he calibration button must remain pressed
during the entire search process (calibration
and search).
22 GB/IE
appears in the device display
also appears in addition
7
. The
3
and keep it
5