First Time Installation - QFX CV-100 Manual De Usuario

CONNECTI NG THE CONVERTER BOX TO YOUR VCR
AC/ DC Wall Outlet
From Antenna
1.Connect your existing antenna cable to the ANTENNA IN of the converter box.
2.Connect the RF coaxial cable from the TV OUT of the converter box to the ANTENNA
jack of the VCR.
3.Connect the other RF coaxial cable ( not included, you may use the one supplied from
VCR ) from the TV OUT jack of VCR to the antenna jack of the TV set.
4.Insert the small plug from supplied AC/DC Adapter into DC IN jack on the rear of the unit.
5.Insert the supplied AC/DC Adapter to any wall outlet having 120-240V~ , 60Hz
.
NOTE:This AC/DC Adapter is intended to be correctly orientated in a vertical or floor mount
position.
FI RST TI ME I NSTALLATI ON
After all connections have been made properly, switch on TV and make sure the receiver is
connected to the main power. Press POWER button to switch on receiver. If you are using
the receiver for the first time or restoring to Factory Default, the Main Menu will appear on
your TV screen.