Motostar LIVIMN-B Manual De Instalación página 5

Setting melodies
☞ All the programming stages described below must be carried out in sequence:
1- Going into Programming.
Press button 5 times in 5 secs 1.
A short beep confirms that you have entered programming mode.
2- Programming the melody associated with a call from the entry panel.
To listen to the melodies in sequence, press key 2.
To select the melody and exit programming, press key
To select the melody and continue with programming, press key
3- Programming the melody associated with a call from the front door.
To listen to the melodies in sequence, press key 5.
To select the melody and exit programming, press key
To select the melody and continue with programming, press key
4- Programming the number of rings for the call.
Press key 8 as many times as you want it to ring (from 1 to 6 rings). Three sec-
onds after the last press of the key the call selected for the chosen number of rings
will be played back.
To exit programming, press key
☞ See the entry panel documentation for call programming.
3.
6.
I.
A
4.
B
G.
C
E
F
H
I
x5
4
G