Vortice Portable Immersion Circulator
User guide
Important safety information
•
Read this user guide in full. Please ensure all safety information is read and understood before using the Vortice.
•
Only connect to the voltage and frequency shown on the serial number plate. An earth is required.
•
The Vortice is designed for use with water only.
•
Safety can only be assured if the Vortice is clamped firmly to a vessel with suitable stability and robustness and
placed on a level non-combustible surface.
•
Ensure the Vortice is positioned so that the plug is accessible for disconnection.
•
Before moving or cleaning, allow the unit to cool down and disconnect from the power supply.
•
When using the Vortice at temperatures above 140°F (60°C), use a cover where possible to avoid excessive
evaporation.
•
The alarm light warns that the Vortice is in a state that could cause harm. Care should be taken when investigating the
warning.
Features
1
2
3
6
4
1.
2.
3.
4.
5
5.
6.
7.
8.
7
8
2
Alarm light
Display
F (function) button
Heater on light
S (select) button
Dial
Clamp & cage
Float: low liquid
level protection