Handle Installation; Handle Door Installattion - Nice LN-5000 UL3 BT Manual Del Usaurio

1.5- HANDLE INSTALLATION

a- Fit the handles on their positions, according with the opening side and direction that the
Biometric Lock was installed.
b- Test the Biometric Lock mechanical operation rotating the handles. The movement must
be soft and unobstructed. If the movement is not soft, review the previously steps to
ensure the proper installation.
c- If the handles were installed in the wrong direction, it will be necessary remove and
install the handles again.
To remove, insert the screwdriver in the hole indicated in the previously image. Push and
hold, and then pull to undock.
Handle connector positioning
or
Not fully fitted
Properly fitted
Português -
English - 52 52