Ink Cartridge Installation Procedure - Oki IP-5620 Guía De Consulta Rápida

Ink cartridge installation procedure

1
Make sure that the ink cartridge upper plate
is face up, and insert the tail section in the
hole shown in white in the figure to the right.
Tail sec tion f ixing
plate
Note
- Do not hold the ink cartridge by the upper plate
only, as it may be taken off. Hold the cartridge
by both the upper and lower plates or from the
bottom to insert it.
2
Referring to the locations on the cartridge
holder shown in the figure, insert the four
protrusions of the ink car tridge lower
plate and slide them under the plate guide
following the arrow direction.
32
3
Insert the ink cartridge spout in the cartridge
holder.
Note
- Do not install the ink cartridge with the spout tilted.
4
Insert the board in the cartridge holder
cover.
With the golden surface of the board facing up, insert
it so that the board shape matches the shape of the
cartridge holder cover.
Note
- Do not take the board protective sheet off until you
install the reloadable cartridge to the printer. This
sheet prevents contact failure.