Product Features; Output Panel Features - Numark PT01USB Manual De Inicio Rápido Del Usuario

PRODUCT FEATURES

1. Platter: Place your record on the platter.
2. Control Panel:
description of control panel features below.
3. Onboard Speaker:
audio from the turntable.
4. Tone Arm Clip: Use this clip to secure the
tonearm when storing and transporting the
unit.
5. Tonearm: This unit comes with a ready-to-
use pre-balanced tonearm and cartridge. The
cartridge is user-replaceable with parts from
your distributor located in the warranty guide.
Please note that the platter starts spinning
once the tonearm is lifted over the record.

OUTPUT PANEL FEATURES

1. Power Switch: Use this switch to turn power on and
off.
2. AC In: If you would like to power the unit externally,
plug the included power adapter into a power outlet,
then turn on the unit.
NOTE: This unit can also be powered by 6 "D" Cell
batteries (Not Included).
3. Master Output (RCA): This line level output is for
connecting the PT01USB to the input of an external
audio device such as a DJ mixer, tape recorder, CD
Burner, PA system, powered speaker, or a home
stereo. The level of the master stereo output signal
is controlled by the audio level control.
4. 1/8" Headphone Jack: Connect 1/8" headphones
to this audio output.
Note: Make sure the volume control is set to the
OFF position before plugging in any headphones to
avoid permanent hearing damage.
Please see detailed
This speaker outputs
6. 45 Adapter: Use this adapter when playing 45
RPM records.
7. Dust Cover: This cover protects the turntable from
dust and abuse while not in use or while in
transport.
8. Dust Cover Latch: This latch holds the dustcover
securely in place, and can easily be opened by
sliding it to the left.
9. Handle: Use this handle to carry the unit.
10. Battery Cover:
place during use and transport. It easily slides open
and closed as indicated on the battery cover.
NOTE: This unit uses 6 "D" cell batteries (not
included).
5. 1/4" Headphone Jack: Connect ¼" headphones to
this audio output.
Note: Be sure the volume control is set to the OFF
position before plugging in any headphones to avoid
permanent hearing damage.
6. USB Audio Output: Use the included USB Cable
to connect your turntable to your computer. Refer to
the software instruction guide before plugging in
your turntable.
cannot be powered through the USB connection.
7. Gain: This knob can be used to adjust the gain level
of the audio signal from the turntable. If the audio
from the turntable is too quiet or too loud, use this
knob to adjust the volume setting.
8. 1/8" Stereo Line Input:
Reel to Reel, or any other audio source here. This
signal is sent to the computer through the USB
connection. Make sure that your phono cartridge
is installed while using this input for maximum
sound quality.
jacks are either plugged into an input device or not
in contact with metal.
Note: The 1/8" audio input is not routed to the
turntable's RCA output jacks, only to your computer
via USB.
2
Holds the batteries securely in
Please note that the turntable
Connect Tape Players,
Also make sure that your RCA