Publicidad
Idiomas disponibles
Idiomas disponibles
3. Equipment supplied
1 Sensor box
Additionally required
1 Sensor cable
4. Technical data
Measuring range:
Resolution
Configuration:
Sensor type:
Probe length:
Calibration range:
2 mT range:
20 mT range:
200 mT range:
2000 mT range:
Max. non-linear:
Temperature dependence:
�� ( �� ) = �� ( 300�� ) ∙ [1 − 0,00088 (
Dimensions;
Weight:
5. Operation
Note:
In order to avoid permanent damage to the
Hall sensor used in the tip of the probe, do
not subject it to any mechanical pressure.
3B Scientific GmbH Rudorffweg 8 21031 Hamburg Deutschland
1021514
2, 20, 200, 2000 mT
0.01 mT (2 + 20 mT)
0.1 mT (200 mT)
1 mT (2000 mT)
Tangential
Linear Hall effect
sensor
135 mm, relative to
the face of the
sensor box case
+/-1 mT
+/-10 mT
+/-100 mT
+/-1000 mT
±1.5% of total
measuring range
��
− 300)]
��
3
230 x 40 x 25 mm
50 g
Subject to technical amendments
© Copyright 2019 3B Scientific GmbH
Do not bend the probe tip.
Connect the sensor to the CMA interface
using the sensor cable. The sensor is
detected automatically.
Detection of the sensor is temporarily out of
action during changes in measuring range
and during the calibration procedure. After a
few seconds the sensor will again be
displayed as detected.
Zero calibration only ever applies to the
selected measuring range. For calibration
purposes, take the sensor out of the
magnetic field and press the "Tare" button.
If the zero calibration needs to be
particularly accurate, the probe tip should
be screened using mu-metal. The zero
calibration is completed after about 5 s.
If necessary, the zero calibration procedure
may
need
to
measurements.
Hold the sensor box in the magnetic field to
be measured, making sure to keep the
sensor element oriented in a tangential
plane, and then carry out the measurement.
6. Disposal
Packaging should be disposed of at local
recycling centres.
If the equipment itself is
to
be
disposed
never put it into normal
household
Local regulations for
disposal of electrical
equipment should be
observed.
www.3bscientific.com
be
repeated
between
of,
waste.
Publicidad
