BSVILLAGE PISCINE BIOTEMP Manual De Instalación página 5

When the relay is activated an R will appear on screen as follows:
MODE Function – Display set parameters
The current pump parameters are accessed by pressing the Esc key for at least 5 seconds By keeping the
Mode button pressed for at least 5 seconds.
Upon release of the key the display will show:
Display
Mon
12345678910 12:04
If pump activation is to occur within the time frame in which a dosing is planned, the pump will dose for the
remaining time relative to that dosing program.
If 2 or more programs overlap, the system will follow the program with the higher index.
Exit Menu:
To exit from the programming Menu, press the Esc key, and the system will display:
Display
Exit
Save
Exit
No Save
Password
0
0000137176
Mon 10.23 100%
PROG 1 R 02m56s
The UP and DOWN keys scroll through the list of
programs.
The days of the week can be scrolled in this way with
the Enter key (if the selected dosing is active on the
day selected, the activation hour and the quantity to
be dosed will be displayed, otherwise "NO")
Exit and save changes with Enter.
Exit and do not save changes with Enter.
Enter the password (if set) to exit and save changes.
rev. 1.0
Settings
Settings
4