Volume Adjustment P; Channel Adjustment P; Advice For Using The 2 Way Radio P; Speaking P - LOGICOM FX 100 Manual De Uso

Volume adjustment
Use the and the keys to adjust the volume. The volume level flashes and v is displayed. Press the PTT key to confirm.
Channel adjustment
The radio has 8 channels. For a group wishing to speak to each other, all radios must be tuned to the same channel.
If interference is encountered, and you need to change channels, ensure that the channel is modified for the whole group's
2 way radios.
• Press the key briefly and then release. The channel number flickers.
MENU
• Press the key or the key to select a channel.
• Press the PTT key to confirm.
Advice for using the 2 way radio
It is important to monitor the channel for activity before speaking to ensure that you do not interrupt other users already
present on the channel. Press the key 3 times to check for channel activity. If you hear static, the channel is ready for
MENU
use.
Speaking
To speak, press and hold down the PTT key. When you have finished speaking, release the PTT key and the radio will emit
a beep (speech confirmation tone). For optimal clarity, hold the radio 5 to 7 cm away from your mouth and speak directly
into the microphone. Do not cover the microphone when you speak.
Receiving
Make sure that you are not pressing the PTT key.
Adjust the volume if necessary with the and keys.
Sending a call tone
The call tone informs others that you wish to speak. To send the call tone to other radios in your group, press the key.
26