Usb Operation - auna Bazzter Manual De Instrucciones

EN
22
MANUAL PRESET MEMORY OPERATION
Choose which stations to save in preset memory instead of scanning
automatically.
1. Use the TUN.+ or TUN.- button to tune to the station that you want to
save as a preset (e.g., 93.1).
2. Press the P-MODE/M. button. "P01" will flash on the display to indicate
that you are saving the station as Preset Memory 01. (To change the
preset memory number, press the 10/MEM./FOLD.+ or 10/MEM./FOLD.-
buttons.)
3. Press the P-MODE/M. button to finish saving the station (e.g., P01 is
now set to 93.1).
4. To save another station, repeat steps 1 to 3. You may save up to 30 FM
stations.

USB OPERATION

This unit provides one USB port for music playback.
1. Press the FUNCTION button on unit to select USB mode.
2. Plug the USB memory stick to the USB port on top of the unit. Playback
will start automatically from Track 1.
3. To pause playback, press the PLAY/PAUSE/PAIR/SCAN button on unit.
The playing time will flash on the display.
4. To resume playback, press the PLAY/PAUSE/PAIR/SCAN button again.
5. To select a desired track, press the TUN.+/
respectively during playing until the desired track appears on the
display. The unit will start play automatically.
6. To search for a particular passage during playback, press and hold the
TUN.+/ or
at high speed until desired point (passage) appears, then release the
button for normal playback mode.
/TUN.- button to scan the current playing track
or /TUN.- button