Omega Lift Equipment 30750 Manual De Piezas E Instrucciones De Funcionamiento página 4

ASSEMBLY
Model 30750:
1. Attach caster (#13) to front leg (#14) with bolts, washers & and nuts (#15, 16 & 17).
2. Attach wheels (#12) to rear leg (#22) with washers & E-ring (#11 & 10).
3. Attach front leg (#14) to center beam (#21) with bolts, washers & nuts (#18, 19 & 20).
4. Attach upright (#27) and center beam (#21) to rear leg (#22) with bolts, flat washers, lock washers & nuts (#23, 24, 25 &
26) up from the bottom.
5. Slide head plate assembly (#9) into collar at top of upright (#27). Align holes and slide in lock pin (#3).
6. Attach all four mounting arms (#8) to head plate (#9) with bolts, flat washers, lock washers & nuts (#7, 6, 5 & 4) as shown.
Mounting arms can be adjusted to most engines.
7. Insert handle (#2) into hole in head plate.
8. Place handle grip (#1) on each end of handle.
Note: Check all fasteners for tightness, tighten where required.
Size of Hardware Kits
4 -Nut M14
5 -Lock Washer M14
6 -Flat Washer M14
7 -Bolt M14x60
10 -E-ring M15
11 -Flat Washer M20
15 -Bolt M8x16
16 -Lock Washer M8
17 -Nut M8
18 -Bolt M10x70 2
19 -Lock Washer M10
20 -Nut M10
23 -Bolt M12x80 1
24 -Flat Washer M12
25 -Lock Washer M12
26 -Nut M12
Qty
4
4
4
2
4
8
8
8
2
2
1
1
1
Figure 4 - Assembly Illustration for Model 30750
B
4
!"#$%&'()
! !
"
"
T0931S-EP
#$%&'()
LBS