Plasmacluster Operation; Auxiliary Mode - Sharp CV -P09FR Manual De Instalación Y Funcionamiento

PLASMACLUSTER OPERATION

The Plasmacluster ion generator inside the air conditioner will release positive and
negative Plasmacluster ions into the room. Approximately the same numbers of posi-
tive and negative ions released into the air will reduce some airborn mold.

AUXILIARY MODE

AUXILIARY MODE
Use this mode when the remote control is not available.
NOTES:
• If the AUX. button is pressed during normal operation, the unit will turn off.
• Upon starting AUXILIARY operation, the drainage pump inside the unit runs for
about a minute, which may produce an audible gurgling sound.
1 Press the PLASMACLUSTER button during
operation.
• The remote control will display "
• The blue PLASMACLUSTER lamp on the unit will
light.
TO CANCEL
Press the PLASMACLUSTER button again.
1
• The PLASMACLUSTER lamp on the unit will turn off.
NOTES:
• Use of the PLASMACLUSTER function will be memo-
rized and it will be activated the next time you turn on
the air conditioner.
• To turn off the PLASMACLUSTER Lamp, press the
DISPLAY button.
• PLASMACLUSTER operation cannot be set during
VENTILATION mode.
1 Press the AUX. button on the unit.
• The red OPERATION lamp (
will light and the unit will start operating in
COOL mode.
1 • The fan speed is set to AUTO.
• The temperature setting is automatically set
according to the room temperature.
TO TURN OFF
Press the AUX. button again.
• The red OPERATION lamp (
turn off.
E-16
".
) on the unit
) on the unit will