Product Specifications - Bose RoomMatch RMS215 Instrucciones De Instalación Y De Seguridad

Installation

Product Specifications

CAUTION: Refer to pro.Bose.com for additional specifications and installation information.
Single Module Performance
Frequency Response (+ / -3 dB)
(1)
Frequency Range (-10 dB)
Recommended High-Pass Protection
Filter
Nominal Coverage Pattern
Recommended Crossover Frequency
Power Handling
Long-term continuous
Peak
Sensitivity (SPL/ 1 W @ 1 m) (2)
Calculated Maximum SPL @ 1 m (3)
Calculated Maximum SPL @ 1 m, peak
Transducers
Low Frequency
Nominal Impedance
Physical
Enclosure Material
Finish
Grill
Connectors
Suspension Attachment
Dimensions (H x W x D)
Net Weight
Shipping Weight
Product Code, Black Finish
Accessories
Footnotes
(1) Frequency response and range measured on-axis in an anechoic environment, with recommended bandpass
(2) Sensitivity measured with indicated boundary conditions, averaged 20 - 200 Hz, referenced to 1W/m.
(3) Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression.
(4) Bose extended-lifecycle test using pink noise filtered to meet IEC268-5, 6-dB crest factor, 500-hour, full-power
(5) AES standard component power handling test: pink noise in 25-250 bandpass, 6-dB crest factor, 2-hour duration.
Page 6 Installation and Safety Guidelines
RMS215 subwoofer
48 – 200 Hz
40 – 280 Hz
40 Hz with minimum 12-dB / octave filter
omni
80 - 200 Hz (active, external DSP)
Bose extended-lifecycle test
1000 W (500 W per woofer)
4000 W (2000 W per woofer)
Array Position Ground Stack
(free field) half space
97 dB
127 dB
133 dB
2 x Bose LF15 long-excursion 15-inch, ferrite-magnet
woofers (4.0-inch voice coil)
2 x 8 ohm (discrete connection per woofer)
18 mm Baltic Birch exterior-grade plywood
Two-part spray polyurethane coating, black
18-gauge (1.2 mm) perforated steel,
powder-coated finish
2 x Neutrik ® NL4 wired parellel
16 x M10 threaded inserts (4 each top, bottom and
sides) optional RMSFLY kit for
RoomMatch Array integration
17.6" x 37.1" x 21.5" (446 x 942 x 546 mm)
132 lbs (59.9 kg) / 168 lbs (76.2 kg) with fly kit
143 lbs (64.9 kg)
330034-0110
RMSFLY side-plate array rigging kit
(4) Bose extended-lifecycle test
1500 W (750 W per woofer)
6000 W (3000 W per woofer)
Array Position
(free field)
103 dB 96 dB
133 dB 128 dB
139 dB 134 dB
2 x Bose LF18 long-excursion 18-inch, neodymium-magnet woofers
18-gauge (1.2 mm) perforated steel, powder-coated finish
24 x M10 threaded inserts (6 each top, bottom and sides) optional RMSFLY218
RMS218 VLF-subwoofer
30 – 200 Hz
25 – 250 Hz
25 Hz with minimum 12-dB / octave filter
omni
50 - 125 Hz (active, external DSP)
(4) AES component test
2500 W (1250 W per woofer)
10000 W (5000 W per woofer)
Ground Stack Array Position
(half space) (free field)
102 dB 96 dB
134 dB 130 dB
140 dB 136 dB
(4.5-inch voice coil)
2 x 4 ohm (discrete connection per woofer)
18 mm Baltic Birch exterior-grade plywood
Two-part spray polyurethane coating, black
2 x Neutrik ® NL4 wired parellel
kit for RoomMatch Array integration
21.0" x 37.0" x 41.5" (534 x 940 x 1055 mm)
203 lbs (92.1 kg) / 248 lbs (112.5 kg) with fly kit
229 lbs (103.9 kg)
344055-0110
RMSFLY218 side-plate rigging kit (369815-0110)
pro.Bose.com pro.Bose.com
(5)
Ground Stack
(half space)
102 dB
136 dB
142 dB
English