Ubbink Robotclean 1 Instrucciones De Uso Y Lista De Piezas página 6

1 Robot Clean 1 Operating Instructions and Parts List
MAINTENANCE
Filter bag maintenance
CLEAN THE FILTER BAGS AFTER EACH CLEANING CYCLE
a. Disconnect the mains adapter from the power supply (see fig. 1). Ensure that the plug does not get wet.
b. Place the cleaner on a smooth, clean surface and remove the top cover by pressing the buttons on both sides (see figs. 2, 3)
c. Remove the filter bags from the holding devices, turn the bags inside out wash all dirt off using a garden hose or into a container (see figs. 4,5,6,7). Carefully squeeze out the bags
until the water runs clear. You can also wash the bags in the machine on cold wash WITHOUT WASHING POWDER.
d. Reattach the bags to the holding devices and reattach the top cover the housing. Press the cover down until the lock tabs engage (see fig. 8)
Periodic Cleaning of Moving Parts
Disconnect the power supply from electrical outlet before cleaning moving parts.
• Inspect the venture to ensure that no debris or hair has clogged the impeller.
• The impeller can be cleaned by spraying it with a garden hose.
• Remove any debris that has accumulated on the wheels
Storage
When out of the water, rinse the cleaner with clean water and store it in a dry, shady location at temperatures between 4°C and 46°C.
Cable Care
With continued use, the cable may become coiled. To correct this, periodically stretching the cord out in the sun should remove any cord twists.
IMPORTANT: The cable should be checked periodically for any external damage