Honeywell HZ-0300 Serie Manual De Instrucciones página 2

HZ-0300_OM.qxd 10/25/06
19. Do not operate the product with a damaged cord or plug or if the product malfunctions, is dropped or
damaged in any manner (see warranty).
20. Avoid contact with moving fan parts.
21. Place the product on a dry level surface.
22. Do not operate if the housing is removed or damaged.
23. SAVE THESE INSTRUCTIONS
SET-UP
• Place the All Season Comfort
least 3 ft. (0.9m) away from any combustible materials. DO NOT use on an unstable surface such as
bedding or deep carpeting. Be sure the heater is not in a position where it may be tripped over by small
children or pets.
• With the product OFF (both the heater and fan on/off buttons will be elevated), plug into a polarized
120V wall outlet.
• DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.
• Do not use with any converters or timers.
OPERATING INSTRUCTIONS
TO OPERATE THE HEATER MODE:
• Press the red heater On/Off button (
top, next to the thermostat control, to turn the
heater mode on.
• The power light will illuminate on the front of
the product.
• Turn the thermostat knob clockwise
up the heat.
• When the room reaches a comfortable temperature, slowly turn the thermostat control counter-
clockwise until the heater goes off. This is the point at which the thermostat setting equals the
room temperature. At this setting, the thermostat will automatically turn the heater on and off to
maintain this selected temperature.
• Press the red On/Off heater button to turn off and unplug the heater
when you are finished using it.
NOTE: THIS PRODUCT IS EQUIPPED WITH A SAFEGUARD
INDICATOR BADGE (FIG. 2). WHEN THE SAFEGUARD
LOCATED ON THE GRILL CHANGES FROM BLACK TO RED THE GRILL IS
HOT TO THE TOUCH. DO NOT TOUCH THE GRILL UNTIL THE UNIT HAS
BEEN TURNED OFF AND THE SAFEGUARD
BACK TO BLACK.
USING THE OSCILLATION FEATURE:
Your HZ-0300 All Season Comfort
oscillation option. If you wish to use this feature, press the oscillation button
( ) and your unit will oscillate side to side. Push the oscillation button (
feature off.
3:11 PM Page 2
™ Fan & Heater on a firm, level, open surface free from obstructions and at
Thermostat Control
) on the
to turn
Fig. 1
™ ALERT BADGE
™ ALERT BADGE HAS TURNED
™ Fan & Heater is equipped with an
Oscillation
Button
Heater On/Off Button Fan On/Off Button
™ ALERT HEAT
Fig. 2
) again to turn the oscillating
Fan Control Knob