Reset All Settings; Programming The Telephone; Handset Setup - GE 27956 Guia Del Usuario

Reset All Settings

Reset all frame preferences to factory default settings.
1. Make sure your phone is OFF (not in talk mode).
. Press the menu/ok button to go to the main menu.
. Use the 5 or 6 button to scroll to Reset All Settings.
4. Press the menu/ok button to enter. The screen displays Are you sure? No Yes.
5. Use the 5 or 6 button to select No or Yes.
6. Press the menu/ok button to save. The screen displays Saved.
7. Press the exit button repeatedly to return to the photo screen.

Programming the Telephone

A menu structure to give you access to all of the built-in features. You may program
the following items in main menu: Intercom, Setup HS, Setup BS, Date/Time, and
Registration.
NOTE: If the handset is not registered, or is out of range, Setup BS
and Date/Time are not programmable, and Unavailable displays as
you try to enter these two menus.
NOTE: During programming, you may press the mute/clear button
at any time to exit the sub-menu and return to the main menu, or
press flash/exit to exit programming and return to standby screen.
NOTE: If no key is pressed for 60 seconds, the handset will
automatically exit programming and return to standby screen.
NOTE: The handset cannot access nor navigate the Frame Setup
menu.

Handset Setup

1. Make sure your phone is OFF (not in talk mode).
. Press the menu button to go to the main menu.
. Press cid/vol (3or4) button to scroll to Setup HS.
4. Press the menu button to confirm and you may program the following items: Ring
Volume, Tones, Auto Talk, Handset Name and Language.
NOTE: If using a Model 27911 accessory handset, there will be
additional menu items which DO NOT apply to the 27956. These
items are used when the 27911 is paired with a model which
includes an answering system.