Maintenance - Hatco CDW-3N Serie Manual Del Usuario

Changing the Setpoint Temperature
General
WARNING
ELECTRIC ShOCk hAzARD:
• Turn power switch OFF, unplug power cord/turn off
power at circuit breaker, and allow unit to cool before
performing any maintenance or cleaning.
• DO NOT submerge or saturate with water. Unit is not
waterproof. Do not operate if unit has been submerged
or saturated with water.
• Do not steam clean or use excessive water on the unit.
• This unit is not "jet-proof" construction. Do not use jet-
clean spray to clean this unit.
• Do not clean the unit when it is energized or hot.
This unit has no "user-serviceable" parts. If service is
required on this unit, contact an Authorized hatco Service
Agent or contact the hatco Service Department at 800-558-
0607 or 414-671-6350; fax 800-690-2966; or International fax
414-671-3976.
Locking/Unlocking the Digital Temperature
Controller
Cleaning
NOTICE
Use non-abrasive cleaners and cloths only. Abrasive
cleaners and cloths could scratch finish of unit, marring
its appearance and making it susceptible to soil
accumulation.
CAUTION! Burn hazard — Do not clean
drawer cavity when unit is on!
OPERATION

MAINTENANCE