NOTE:
• The mechanical parts with no reference number in the
exploded views are not supplied.
• Items marked " * " are not stocked since they are seldom
required for routine service. Some delay should be
anticipated when ordering these items.
• When two or more parts are shown in parallel, use the
part described first as the main part.
There are some parts that use the 2 types ; the [CH] parts or alternately the [JP] parts, in this series.
Use the [CH] repair parts for the [CH] type product, vice versa.
The jack and connectors mounted on the board of this model can be repaired in the [JP] type only.
And regarding the boards of [CH] type, the discrete parts on the boards cannot be replaced.
However, some connectors can be replaced.
For details, refer to "5-5.Connector Section".
[ How to identify the parts ]
[ Repair part description example ]
Ref.No. Part No.
999
A-8058-171-A [CH]...MBX-49 Z3 (CH) ASSY (S)
999
A-8025-236-A [JP]...MBX-49 Z3 (JP) ASSY (S)
EXPLODED VIEWS AND PARTS LIST
How to use properly the repair parts.
2Door DIMM
Identfication Seal Serial No.
A-xxx-xxx-A x xxxxxxxxx
2 : Using [JP] type
6 : Using [CH] type
Description
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
1M2X4
Special Head (Black)
Identification seal is attached on the
expansion memory connector.
5-1
CHAPTER 5.
Confidential
PCG-FX777/FX877 (AM)