Operating Profilux Units Via Egc - Oase InScenio Instrucciones De Uso

- EN -
7.1.3

Operating ProfiLux units via EGC

"Home" screen
The OASE product name will be displayed at the top right of the screen. The added device can be labelled
with an individual name.
1 Tiles for operation and display of current values.
· Swipe vertically across the tiles to display additional tiles.
2 Switching the device on or off.
· Tap the touch symbol "On" to switch on the device.
· Tap the touch symbol "Off" to switch off the device.
3 Selecting the device for operation and display of current values or changing the lamp symbol.
Selecting the device for operation and display of current values
– Tap the lamp symbol to select a device for the required operation and display of current values.
– Tap the lamp symbol again to deselect the device.
· Changing the lamp symbol
iOS:
– Touch and hold down the lamp symbol for 2 seconds in order to select a photo from the library, to
take a photo using the integrated camera or to remove a photo.
Android:
– Touch and hold down the lamp symbol for 2 seconds in order to take a photo using the integrated
camera or to remove a photo.
20
Adjusting the brightness
The brightness is adjusted for all selected LED lamps.
How to proceed:
· Touch the button of the slider control and move it to adjust the brightness.
– The set brightness is displayed in %.
0 %: LED lamps off.
100 %: Max. brightness.
EGC0020