Product Overview; System Requirements; Package Contents; Factory Default Settings - Nilox DAS-1410 Manual De Instrucciones

Thank you for purchasing Nilox Wireless N ADSL2+ Router that provides the easiest way to wireless networking. This
document describes how to install your Nilox Router. Please keep this Quick Start Guide for future reference.
P O
RODUCT VERVIEW
 ADSL2+ Built-In modem for high-speed Internet Access (up to 24Mbps)
 IEEE 802.11n compliant, to support up to 150Mbps speed (backward compatibility with 802.11b/g specifications)
 4-port Fast Ethernet switch
 Strong network security with WEP and WPA/™WPA2™ support
 The Quality of Service (QoS) prioritizes traffic to enable a group users/applications to enjoy the benefit of a smooth
network connection
 ADSL Filter included
 Easy to install and configure
S R
YSTEM EQUIREMENTS
Before installing the Adapter, your PC should meet the following:
 ADSL Internet service
 Ethernet Adapter with TCP/IP Protocol Installed
 Internet Explorer v6.0 or later, Mozilla Firefox v1.0 or later, Safari 2.0 or later, Google Chrome 1.0 or later
P C
ACKAGE ONTENTS
Open Nilox Wireless N ADSL2+ Router box and carefully unpack it. The box should contain the following items:
 Wireless N ADSL2+ Router
 AC/DC Adapter (12V@0.5A)
 RJ11 and RJ45 cables
 ADSL Filter (RJ11)
 One MultiLanguage Quick Start Guide (English, Spanish and Italian)
 CD-Rom with Manual (English and Italian)
If any item is found missing or damaged, please contact your local reseller for replacement.
F D S
ACTORY EFAULT
Before you configure this Wireless N ADSL2+ Router, you need to know the following default settings:
 Username: admin
 Password: nilox
 IP address: 192.168.1.1
 Subnet Mask: 255.255.255.0
 DHCP Server: enable (from 192.168.1.100 to 192.168.1.199)
 WAN=PPPoA, VPI=8, VCI=35, VC-Mux
 SSID(16NXRW14CQ001): DAS-1410, Encryption: WPA-PSK (AES), WPA Pre-shared Key: Nilox1410
To reset password or to restore factory settings, press the reset button (10 seconds).This procedure is usually used when
you can't login to the router, e.g. forgot the password
C
ABLING
 Firstly connect the product to the ADSL line through the RJ11 cable included in the equipment (in the DSL gray port)
 Connect the PCs of your Lan or another Switch (up to 4) to the yellow RJ45 ports
 Finally connect the AC/DC Adapter to the Wireless ADSL2+ Router and then to the socket
 Once you've checked all the connections, switch on the Wireless ADSL2+ Router: the product will carry on an auto-
test immediately (60 seconds)
After this, the LEDs status will be the following:
ETTINGS
17
ENG