Safety Instructions - Optimus LS-320 Manual De Instalación Y Funcionamiento

LS-320
Feed Back Suppressor

SAFETY INSTRUCTIONS:

Read carefully all safety and operation instructions before operate the unit. Keep this owner's
manual for future reference.
The unit is carefully packed in the factory and the packaging is designed to protect the unit
from rouge handing. However, we recommend you examine the packaging and its content
carefully for any signs of physical damage which may have occurred during transit. If the unit
damaged, please notify your dealer and the shipping company immediately, otherwise claims
for damage or replacement may not be granted. Shipping claims must be made by the
consignee.
The unit can be installed into a standard 19" rack unit of space. Is recommended 10 cm depth
to be left for the back panel's connectors.
It should be situated in an area with proper ventilation for cooling. It should not be placed near
an amplifier or other equipment that produce heat.
Make sure the power outlet conforms the power unit requirements before plugging to AC
mains.
The mains connection of the unit is made by using a mains cable with 3 pins plug. It meets all
safety certification requirements.
Please make sure that all units have a proper ground connection. For safety sake, please do
not remove the ground connection within the units or at the supply, or fail to make this
connection at all.
If the unit is switched to another operating voltage, the fuse rating must be changed. Please
see the technical specifications in the appendix.
Only qualified service personnel should be allowed to install and operate the unit. The user
should not attempt to use the unit beyond the description listed in the user's manual.
LS-320 Version 3.0 Page 1 of 12