Product Diagram; How To Use - TaoTronics TT-AH001 Manual De Usuario

Product Diagram

① Nozzle
② Handle
①
③ Tank panel
④ Water tank
③
⑤ Water intake
⑥ Filter
⑦ Water sink
⑧ Cleaning brush
⑨ Transducer
⑩ Fixer for floater
⑦
Floater
11
⑧
Base
12
⑨
Indicator
13
LED display
14
12
Function buttons
15
16
Power cable
16

How to Use

Please put this unit in your house for half an hour before first use without
any operation, especially when the outdoor temperature is below 41°F/5ºC.
Important:
• Do not turn on the unit with no water in the tank, it will cause serious damage
• Do not touch the water in the sink or any component of the sink while
the unit is working
• Do not put corrosive liquids in the tank
Filling Water
1. Remove the water tank from the base
2. Twist to loosen the switch of the filter on the bottom of the water tank
②
and fill water in the tank; then twist the filter back on
3. Put the tank back on the base
Important: Do not fill the water tank via the nozzle
④
Power On/Off
1. Press the ON/OFF button once to power on the unit. When the unit is on:
⑤
• The LED display will be on
⑥ • The unit starts to work with lowest mist output
• The fan starts blowing wind at the same time
⑩
2. Press the ON/OFF button again to turn off the unit:
11
• The LED display will be off
• All but the fan will be off
13
• The fan will be off 5 minutes later
14
Mist Level
15
The TT-AH001 Cool-Mist Humidifier provides 3 levels of mist outlets. Simply
press the "MIST +/-" button to choose the mist outlet level you want.
Nightlight Mode / Sleep Mode
1 Power on the unit
2. Press the "NIGHTLIGHT/SLEEP" button to enter Nightlight Mode
3. Press the "NIGHTLIGHT/SLEEP" button again to turn off the Nightlight
Mode and enter Sleep Mode. LED indicator will show sleep mode icon,
and the humidifier will output lowest mist
4. Press the "NIGHTLIGHT/SLEEP" button again to go back to Normal Mode
03/04