English
Thank you for choosing an appliance from
the KRUPS Electrical Cooking assortment,
designed for domestic use only.
Description
a
Non-stick grill or flat plates (according
to model)
b
Insulated Cool-touch handle
c
Safety locking latch for storage
d
On/Off indicator light
e
Ready indicator light
f
Floating Hinge System
Getting Started
• Place the appliance on a stable, heat
resistant surface: do not use it on a soft
surface such as a table pad.
Do not place the appliance on or near
slippery or hot surfaces. Do not let the
cord hang down over a source of heat
(hot plates, gas cookers, etc.).
Before using the appliance for the first time:
• Open the appliance.
• Remove any packaging, stickers and
accessories from both inside and outside the
appliance.
• Lightly coat the plates with vegetable oil or
non-stick cooking spray.
Using the appliance
• Close the appliance.
Check that your electrical installation is
compatible with the power and voltage
shown underneath the appliance.
Plug the appliance into an earthed socket
only.
If the power supply cord is damaged, it must
be replaced by the manufacturer or its
service agent or a similarly qualified person
in order to avoid a hazard.
• Plug into outlet. Both of the indicator lights
(d) and (e) will illuminate (1).
• When the appliance reaches the required
temperature, the ready indicator light (e)
will go out (2).
When the appliance is used for the first
time, it may give off a slight odor and
smoke, this is normal.
8
• Open the appliance and place the food on
the lower plate.
• Close the appliance. The Krups floating
hinge system (f) easily adjusts to
accomodate different food thickness (3).
• Leave the food to cook for the desired time.
• You can open the appliance at any time to
check on the progress of the cooking.
• When the desired result is achieved, remove
the food using a wooden to avoid damaging
the non-stick coating (4) (5).
• Unplug the appliance and allow it to cool.
Practical hints
• It is recomended to adapt cooking
according to your own taste.
• Avoid the use of metallic or sharp utensils,
as they will damage the non-stick coating of
the plates.
Cleaning
• Always disconnect the appliance before
cleaning, and leave to cool.
• Do not place the appliance in water or
under running water.
• To clean the exterior, wipe with a damp
cloth and dry.
• To clean the interior, wipe the plates with
a damp cloth, some dishwashing soap may
be used. Then wipe with a wet sponge and
dry carefully.
• Do not use metal scouring pads,
scouring powders, or abrasives when
cleaning the interior or exterior of this
appliance.
Storage
The appliance can be stored vertically to save
space. Close the safety locking latch (c) for a
convenient upright storage (6).