Lullaby Function; Out Of Range Alert - Philips AVENT SCD535 Instrucciones Importantes De Seguridad

2 To stop the paging alert tone, press the PAGE button again or press any button on the parent
unit.

lullaby function

Note: You can also operate the lullaby function in the menu of the parent unit (see chapter 'Menu
options', section 'Lullaby function').
1 Press the play/stop button E on the baby unit to play the currently selected
lullaby. (Fig. 30)
2 To select another lullaby, press the lullaby button K on the baby unit within 2 seconds to
toggle through the list of lullabies. (Fig. 31)
Note: If you do not press the lullaby button K for more than 2 seconds, the lullaby shown on the display
starts to play.
The number of the lullaby appears on the display together with the lullaby symbol K.
,
The selected lullaby is repeated 5 times in a row.
,
When you select 'play all', all 5 lullabies are played once.
,
3 To stop the lullaby, press the play/stop button E on the baby unit again. (Fig. 30)
4 To select another lullaby when a lullaby is playing:
- Press the lullaby button K on the baby unit within 2 seconds to toggle through the list of
lullabies.
Note: If you do not press the lullaby button K for more than 2 seconds, the lullaby shown on the display
starts to play.
humidity
When there is a connection between the baby unit and the parent unit, the humidity level is shown
on the display of both units.
The optimal humidity level is between 40% and 60%. It is very important to maintain the correct
humidity level as it helps to protect your baby from irritation of the mucous membranes, dry and
itchy skin, chapped lips and a dry, sore throat. When the mucous membranes do not function
optimally, they cannot give your baby full protection from all kinds of germs. This increases the
chance of your baby catching a cold or the flu, and reduces its resistance to infections from mold
and bacteria.
Note: The baby monitor only measures the humidity level. You cannot adjust the humidity level with the
baby monitor.

out of range alert

When the parent unit is out of range of the baby unit, the parent unit beeps from time to time and
the messages 'Searching' and 'Not linked' appear on the display. The LINK light on the parent
unit flashes red.
Note: The message 'Not Linked' also appears on the display of the parent unit when the baby unit is
switched off.
EngliSh
15