HAWA-Folding Concepta 25
2
Product information
Intended use
Pivot/slide-in hardware for laterally retractable wooden doors for cabinets or wall recesses.
Intended place of use
This furniture hardware is designed for protected interior rooms.
Tecnical data
Maximum door weight
Door width
Door height
Door thickness
Sets are marked left and right
Use Hawa article number 18705 or commercially available door alignment hardware.
Maximum permissible deflection of the hardware assembly face and door ± 2 mm ( ").
Maximum deflection of the cabinet top 2 mm ( ").
Use a commercially available bow handle on the folding door.
Article number
Articles are identified by a 5-digit number.
General notes
The document «Safety Instructions (22991)» is an integral component of these installation instructions.
A function check must be performed when installation is completed.
Hand over the instructions and the document on «Safety notes» (22991) to the user after completion of the function check.
Metric dimensions in mm apply - dimensions stated in inches are for information only.
Please retain these instructions; replacements are available from info@hawa.ch.
Hawa components.
Indicates practical information and tips that enable the optimum use of machines, equipment or devices
Risk and residual risk hazard
The hardware does not pose any risk or residual risk.
If using HAWA-Folding Concepta 25 to conceal electrical appliances, ensure compliance with the safety notes provided by the app-
liance manufacturer (heat accumulation). If necessary, use an automatic shutoff device (e.g. Safety Box, www.halemeier.de).
CAUTION
Moving parts can crush fingers.
– Do not touch moving parts!
Disposal
Materials, accessories and packaging should be recycled in an environmentally friendly manner.
25 kg (55 lbs.) (50 kg [110 lbs.] per pair of doors)
13
300–700 mm (11 "–2'3 ")
---- -
16
7
1250–2600 mm (4'1 "–8'6 ")
---- -
32
3
1
19–28 mm ( "–1 ")
- -
- -
4
8
3
---- -
32
9
---- -
16
3
- -
8
3
---- -
32
7