Descargar Imprimir esta página

JENN-AIR JGC9536 Guía De Usuario página 8

Ocultar thumbs Ver también para JGC9536:

Publicidad

Idiomas disponibles

Idiomas disponibles

U
Y
SING
OUR
G
-C
LASS
ERAMIC
NOTES:
• Cooktop may emit light smoke and
odor the first few times the cooktop
is used. This is normal.
• The glass-ceramic surface may ap-
pear discolored when it is hot. This
is normal and will disappear when
the surface cools.
• Glass-ceramic cooktops retain heat
for a period of time after the unit is
turned off.
• NOTE: Do not attempt to lift the
cooktop.
C
,
OOKTOP
CONT
S
URFACE
T
P
IPS TO
G
THE
LASS
S
URFACE
• Before first use, clean the cooktop. (See
Cleaning, page 8.)
• Do not allow plastic, sugar or foods with
high sugar content to melt onto the hot
cooktop. Should this happen, clean im-
mediately. (See Cleaning, page 8.)
• Never use cooktop as a work surface or
cutting board.
• Do not slide metal pans across a hot
surface. The pans may leave marks which
can be difficult to remove or leave perma-
nent marks. Any marks should be re-
moved promptly. (See Cleaning, page 8.)
• To prevent scratching or damage to the
glass-ceramic top, do not leave sugar, salt
or fats on the cooking area. Wipe the
cooktop surface with a clean cloth or
paper towel before using.
.
ROTECT
-C
ERAMIC
7
• Never use a soiled dish cloth or sponge
to clean the cooktop surface. A film will
remain which may cause stains on the
cooking surface after the area is heated.
• Do not use foil or foil-type containers.
Foil may melt onto the glass. If metal
melts on the cooktop, do not use. Call an
authorized Jenn-Air Servicer.
• Do not allow spills to remain on the
cooking area or the cooktop trim for a
long period of time.
• Do not use abrasive cleansing powders
or scouring pads which will scratch the
cooktop.
• Do not use chlorine bleach, ammonia or
other cleansers not specifically recom-
mended for use on glass-ceramic.
• To retain the appearance of the glass-
ceramic gas cooktop, clean after each
use.

Publicidad

loading

Este manual también es adecuado para:

Jgc9430