Honeywell FocusPRO TH6320 Guia De Instalacion página 8

FocusPRO Thermostat Installation Guide
®
4
Mount thermostat
3/16" holes for drywall
7/32" holes for plaster
Wall anchor
Detach wallplate
Replacing system components
To replace a thermostat, install batteries and follow the procedures on page 2 to link it to
the wireless network. If necessary, modify settings as needed (see tables on pages 4-6).
After installing a new EIM or zone panel, you must re-set the thermostat to communicate
with the new EIM or zone panel, as described below.
1 Press and hold the thermostat's FAN and s buttons for 3 seconds.
2 Press BACK twice to display Function 39 (wireless setup).
3 Press t to change Function 39 setting to 0 (disconnect from old system).
4 Follow the procedures on page 2 to relink to new system.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
http://customer.honeywell.com
® U.S. Registered Trademark.
© 2011 Honeywell International Inc.
69-2092EFS—07 M.S. Rev. 06-11
Printed in U.S.A.
Wallplate
Honeywell Limited-Honeywell Limitée
35 Dynamic Drive
Toronto, Ontario M1V 4Z9
Mounting screw
M28490