SIMREX NSO evo3 Guia De Inicio Rapido página 7

Routes
To create a route:
1.
Activate the cursor on the chart panel
2.
Select the new route option in the menu
3.
Tap the chart to position the first routepoint
4.
Repeat point 3 to position additional routepoints
5.
Save the route by selecting the save option from the menu
Navigating
To navigate to cursor position:
1.
Position the cursor at the selected destination on the panel
2.
Select the goto cursor option in the menu
To navigate a predefined route:
•
Tap the route to make it active, then select the start route option in the menu
•
Select the route from the Routes dialog, then select the start option in the dialog
Echosounder
B
Toggle available echosounder frequencies from the menu. Available options depend on
type of transducers connected to the system.
50 kHz
Single
83 kHz
frequency
transducers
200 kHz
A
Lower resolution images. Best performance in deep water
Greater water coverage
High resolution images and better target separation in
shallow water
•
Zoom the image by using spread or
pinch gestures, or by using the zoom
buttons (A).
•
View echosounder history by panning
the image.
•
Adjust gain and color from the slide bar,
displayed by tapping the gain or color
icon (B).
•
Toggle auto gain on/off from the menu.
NSO evo3 | QuickStart Guide - EN
|
7