Using Your Vco; Incoming Voice Volume; Incoming Voice Tone - Plantronics Walker AMERIPHONE VCO Instrucciones De Operación

IMPORTANT INSTRUCTIONS

Using Your VCO

Incoming Voice Volume

1. Press the AMPLIFY button as
shown in Figure 8 to turn the
incoming voice amplifier on or
off. When AMPLIFY is on, the
AMPLIFY indicator comes on.
HOLD
TONE
Figure 8 - AMPLIFY Button and
Indicator
2. Adjust the volume in the
handset by moving the VOL
slide control in Figure 9. With
AMPLIFY on, incoming volume
will be up to 26 dB louder.
HOLD
TONE
LO
Figure 9 - Volume Slide Control
10
0
* #
E
PROG FLASH REDIAL
AMPLIFY
VOL
LO HI
PROG FLASH REDIAL
AMPLIFY
VOL
HI

Incoming Voice Tone

The VCO also has a tone control ,
so you can adjust of the sound
frequency level to best suit your
hearing. To identify the sound
frequency range that best suits
your needs, follow these steps:
1. When you hear a voice on the
line, press the AMPLIFY button
as shown in Figure 8.
2. Adjust the TONE slide control as
in Figure 10 to suit your hearing.
HOLD
TONE
LO
Figure 10 - Tone Slide Control
PROG FLASH REDIAL
AMPLIFY
VOL
HI