Publicidad
Idiomas disponibles
Idiomas disponibles
6. Clean your unit with a damp cloth only. Do not use solvents or
abrasive cleaners. Never pour liquid on or into the unit.
7. Your unit should be serviced by qualified service personnel when:
• The power supply cord or the plug has been frayed,
kinked, or cut.
• Objects have fallen or liquid has spilled into the unit.
• The unit has been exposed to rain or other moisture.
• The unit does not appear to operate normally or exhibits
a marked change in performance.
• The unit has been dropped, or the enclosure damaged.
8. Your unit requires that a safety ground be present for proper
operation. Any attempt to operate the unit without a safety ground is
considered improper operation and could invalidate the warranty.
9. Do not attempt to service your unit beyond what is described in
this manual. All other servicing should be referred to qualified service
personnel.
Overview
While the AC power delivered by today's overworked and outdated
power grid may be adequate for typical lighting and consumer products,
it is well below the level of quality needed for connecting sensitive audio
and video equipment. With the average investment in home theater
equipment steadily rising, it's more important than ever to purify or clean
your incoming AC power.
Furman's Series Multi-Stage Protection Plus (SMP+) circuitry
incorporates Linear Filtering Technology (LiFT) to ensure that flat
screen televisions, projectors, processors, and other sensitive audio/
video components are fed linearly-filtered AC power. This dramatically
reduces noise, ensuring consistent, peak performance from your
equipment. The result is better performance, a better quality picture, and
less wear on your components.
4
Publicidad
