Briteq COB BLINDER 2X 100W Manual De Instrucciones página 7

ENGLISH
HOW TO SETUP:
MAIN MENU:
• To select any of the menu options, press the MODE button until the option is shown on the display.
• Select the function with the ENTER button. The display will blink.
• Use DOWN and UP button to choose the desired menu option.
• Once the required menu option is selected, press the ENTER button to select.
DMX ADDR
Used to set the desired DMX-address.
• Press the MODE button until the desired
function is showing on the display.
• Press the ENTER button: the values can
be changed
• Use DOWN and UP buttons to select the
desired DMX512 address. The last
occupied DMX-address is also shown:
makes it easier to set the address of the
next unit in the chain.
• Once the correct address shows on the
display, press the ENTER button to save
it.
CH. MODE
Used to set the desired channel mode.
• Press the MODE button until the desired
function is showing on the display.
• Press the ENTER button: the values can
be changed
• Use DOWN and UP buttons to select the
desired mode:
• CH:01
master dimmer
• CH:02
strobe + master dimmer
• CH:04
dimmer
projector 2 + strobe + dimmer curve
• Once the correct option shows on the
display, press the ENTER button to save
it.
SLAVE MODE
Used to set the projector as slave in a
master/slave setup.
• Press the MODE button until SLAVE
MODE is showing on the display.
DIM PIX1 / DIM PIX2
Used to set the master dimmer while used as master.
• Press the MODE button until DIM PIX1 (dimmer channel 1) is shown on the display.
• Press the ENTER button to select.
• Use DOWN and UP buttons to change the intensity of the projector.
• Press the ENTER button to confirm your setting and to go to DIM PIX2 (dimmer channel 2).
• Use DOWN and UP buttons to change the intensity of the second projector.
• Press the ENTER button to confirm.
Note: the setting of this option has NO effect while the projector is used as SLAVE or in DMX-mode.
DIMMER CURVE
Used to set the dimmer curve of the master dimmer.
• Press the MODE button until the desired function is showing on the display.
• Press the ENTER button: the values can be changed
BRITEQ
®
projector 1 +
5/44
USER MANUAL
COB BLINDER 2X100W