Beginning Work With The Machine - Taski swingo 760E Manual Del Usuario

Dosing
Attention:
Wear gloves, goggles and appropriate
(protective) working clothes when han-
dling chemical products!
Notice:
Use chemical products recommended by
Diversey only and always observe the
product information.
Caution:
Using unsuitable products (e.g. products
containing chlorine, acids or solvents) may
cause harm to health and severe damage
to the machine.
Notice:
For a precise dosage, use the scale in the
dosage cup.
The filling level mark on the tank corre-
sponds to the mark in the dosage cup. The
type of machine is also noted in the dos-
age cup!
Information on Tank capacity
the package of
the product
0.5% 1/2
MAX
1% 1/2
MAX
Dosage cup application
• Fill the product you have measured with the dosage cup
into the fresh water tank.
• Slightly lift the tank cover.
• Push the tank cover support slightly inwards.
• Close the tank lid.
• By pushing gently on the front part of the tank cover you
lock the tank.
Pre-cleaning
Attention:
Remove any objects (wooden, metal parts
etc.) from the cleaning surface.
The objects could be catapulted by the ro
tating tool, and thereby cause injuries to
people and damage to the environment.

Beginning work with the machine

Cleaning start
• Plug the power supply cord into the mains socket.
Dosage cup
1 x 1/2
1 x MAX
1 x MAX (2 x 1/2)
2 x MAX
-
Attention:
Always wear slip-resistant shoes and ap-
propriate working clothes when working
with this machine!
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
• Lower the squeegee.
• Switch on the machine (key switch).
Switch lights up
• Unlock the foot pedal and lower the
tool slowly.
• Switch off the suction unit.
Switch lights up
• Switch off the water pump.
Switch lights up
• Use the quantity control to dose the
cleaning solution.
• Pull the switch bracket drive on the
driving handle.
The tool starts to rotate and the
cleaning solution supply starts.
EN
7